The Green Pika

A problem solving primer for previously painted or non-drywall surfaces.  It helps to transition from oil-based surfaces to water-based coatings.

Coverage:  One gallon of Transitional Primer will cover approximately 300-350 square feet in one coat.  One full coat is generally sufficient for most jobs.

Recoating:  For best results, wait at least 8 horus before recoating or finish coating. 

A fast curing, flat finish primer specially formulated to provide a prime coat over interior surfaces such as new gypsum board and textured sheetrock.  It does not require thinning, but if desired for easier application, it may be thinned with no more than 1 gallon of water per 5 gallons of material.  Do not apply over existing wallpaper. 

Coverage:  Approximately 300-400 square feet.  Product may be tinted for best results under deep accent or transparent colors. 

For used on non-ferrous metal, steel, aluminum, galvanized and masonry (not recommended for copper).  Very low odor and very low VOC.

Coverage: One gallon covers approximately 300 square feet in one coat.  It dries to touch in about 30 minutes and can be recoated after 4 hours. 

AFM avoids using extenders, drying agents, formaldehyde, mildewcides and fungicides.  The result is a higher quality resin content with none of the unnecessary paint additives.  Safecoat paints also  cures to help seal in outgassing from hazardous chemicals contained in previously used coatings or building materials.  All paints clean up easily with water. 

Coverage: One gallon of Safecoat paint covers approximately 350 square feet in one coat depending on surface porosity.  Untreated drywall will require several coats.   

Recoating: Under normal conditions, Safecoat paint can be recoated after 4 hours.  For best results, wait at least 8 hours before recoating. 

Zero VOC Flat, Semi-Gloss, Pearl, and Eggshell

For all interior wall surfaces.  Available in several colors.  We can also color-match the paint colors.

A weather resistant coating for exterior surfaces.  It is very low VOC as well as very low odor.

Coverage: One gallon covers approximately 350 square feet in one coat.    Under normal conditions, it can be recoated in approximately 4 hours.   

A very durable coating for high contact areas such as cabinets, trim, baseboards, chair rails and doors.  Available in Eggshell and Semi-Gloss finishes.  Use on new or existing, properly primed wooden trim and doors. 

Coverage:  One gallon covers approximately 350 square feet in one coat.